close
Choose Your Site
Global
Social Media
 |
| Quantity: | |
|---|---|
KP104C-7T
Control panel | LED digital display | Wind speed/ion balance degree/cleaning time/cleaning interval/local address/gateway address/communication channel (locked, foolproof) |
Automatic cleaning button | It can be automatically cleaned every 8 hours (time can be customized for large quantity) | |
Fault alarm | Wind sound/red indicator flash | |
ouch button speed control | Remote control/touch control | |
Wind speed gear | Remote control/touch control | |
Power start | Remote control/touch control | |
Touch button | Remote control/touch control | |
Power | Power intelligent frequency conversion AC 220V/240/110 / DC control system | Intelligent control system/fan DC12V |
The socket is connected to the back | / | |
Appearance | Fan angle control screw hole is reserved on the side | / |
Material | Cold rolled plate | |
Surface | Electrostatic spray paint | |
Front plastic windshield | It can be disassembled freely. | |
Rear plastic windshield | Filter network is optional | |
Casing grounded | No electricity leakage | |
Include the size of bracket | 1000mm(L)*150mm(W)*128mm(H) | |
Not include the size of bracket | 1000mm(L)*150mm(W)*90.5mm(H) | |
Static electricity facilities | Automatic cleaning of discharge needle | / |
Discharge needle material | Tungsten alloy, non-detachable | |
Power consumption time | ≤2S(300mm from the product) | |
Ion balance | ≤|±10V|(300mm from the product) | |
Connection mode | Frequency conversion AC 5 .0KV | |
The effective control diameter for static electricity elimination is 300mm | 300mm from the product | |
Cleaning brush | Antistatic material, no abrasion or picking | |
Blower | Fan air volume ≤5.1m3/min | 300mm from the product |
Power | 16W | |
Working distance | 100-600mm | |
Working temperature | 0-50ºC | |
Working humidity | 30%-65% | |
Air velocity | 160-330CFM | |
Noise | 45-60dB | |
Net weight | About 6.68kg | |
Gross weight | About 7.8kg | |
Other | One year of warranty | |
Testing condition | ||
Hunidity:≤60% Testing voltage:1KV-100V Temperature:22ºC | ||
Distance | 300mm | |
Decay time | Positive | 0.6s |
Negative | 0.7s | |
Offset voltage | Positve | +5v |
Negative | -6v | |
* The test result by ME268A comprehensive electrostatic tester shall prevail.
* Test according to IEC - 61340-5-1 A 6.
* Test data may change with the surrounding temperature and humidity.
KP104C-7T 6th generation intelligent overhead 4 fans ionizing air blower is an intelligent anti-static device newly developed and produced by Kapper to eliminate static electricity on the surface of an object.
KP104C-7T 6th generation intelligent overhead 4 fans ionizing air blower is provided with wind power by a small fan, and the wind power can be adjusted in the touch button or remote control.
KP104C-7T 6th generation intelligent overhead 4 fans ionizing air blower is used in precision electronics, pharmaceutical manufacturing, plastics, optoelectronics and other industries.
1. Intelligent and modern, exquisite appearance, exquisite production and novel design.
2. Automatic cleaning function of launching needle brush, deeper maintenance (cleaning time/cleaning interval/positive and negative cleaning direction/power-on cleaning can be set by yourself).
3. Remote control, touch dual control power to start, adjust the wind power.
4. The remote control lock screen locks the wind speed and parameter settings, and the workshop ion fan achieves standardization of static elimination.
5. With fan abnormal alarm, high-pressure abnormal alarm and ion balance threshold exceeding alarm function, the wind machine self-checking protection stops working.
6. Lora and Zigbee can be interchanged and networked to achieve network monitoring functions (local address, gateway address, and communication channel can all be set by themselves).
7. Digital display of ion balance.
8. The screen contrast is adjustable.
9. You can choose to increase the infrared sensor function according to your needs.
10. Fast static elimination speed, low balance voltage and high safety performance.
11. Energy saving and environmental protection, low power consumption.
Control panel | LED digital display | Wind speed/ion balance degree/cleaning time/cleaning interval/local address/gateway address/communication channel (locked, foolproof) |
Automatic cleaning button | It can be automatically cleaned every 8 hours (time can be customized for large quantity) | |
Fault alarm | Wind sound/red indicator flash | |
ouch button speed control | Remote control/touch control | |
Wind speed gear | Remote control/touch control | |
Power start | Remote control/touch control | |
Touch button | Remote control/touch control | |
Power | Power intelligent frequency conversion AC 220V/240/110 / DC control system | Intelligent control system/fan DC12V |
The socket is connected to the back | / | |
Appearance | Fan angle control screw hole is reserved on the side | / |
Material | Cold rolled plate | |
Surface | Electrostatic spray paint | |
Front plastic windshield | It can be disassembled freely. | |
Rear plastic windshield | Filter network is optional | |
Casing grounded | No electricity leakage | |
Include the size of bracket | 1000mm(L)*150mm(W)*128mm(H) | |
Not include the size of bracket | 1000mm(L)*150mm(W)*90.5mm(H) | |
Static electricity facilities | Automatic cleaning of discharge needle | / |
Discharge needle material | Tungsten alloy, non-detachable | |
Power consumption time | ≤2S(300mm from the product) | |
Ion balance | ≤|±10V|(300mm from the product) | |
Connection mode | Frequency conversion AC 5 .0KV | |
The effective control diameter for static electricity elimination is 300mm | 300mm from the product | |
Cleaning brush | Antistatic material, no abrasion or picking | |
Blower | Fan air volume ≤5.1m3/min | 300mm from the product |
Power | 16W | |
Working distance | 100-600mm | |
Working temperature | 0-50ºC | |
Working humidity | 30%-65% | |
Air velocity | 160-330CFM | |
Noise | 45-60dB | |
Net weight | About 6.68kg | |
Gross weight | About 7.8kg | |
Other | One year of warranty | |
Testing condition | ||
Hunidity:≤60% Testing voltage:1KV-100V Temperature:22ºC | ||
Distance | 300mm | |
Decay time | Positive | 0.6s |
Negative | 0.7s | |
Offset voltage | Positve | +5v |
Negative | -6v | |
* The test result by ME268A comprehensive electrostatic tester shall prevail.
* Test according to IEC - 61340-5-1 A 6.
* Test data may change with the surrounding temperature and humidity.
KP104C-7T 6th generation intelligent overhead 4 fans ionizing air blower is an intelligent anti-static device newly developed and produced by Kapper to eliminate static electricity on the surface of an object.
KP104C-7T 6th generation intelligent overhead 4 fans ionizing air blower is provided with wind power by a small fan, and the wind power can be adjusted in the touch button or remote control.
KP104C-7T 6th generation intelligent overhead 4 fans ionizing air blower is used in precision electronics, pharmaceutical manufacturing, plastics, optoelectronics and other industries.
1. Intelligent and modern, exquisite appearance, exquisite production and novel design.
2. Automatic cleaning function of launching needle brush, deeper maintenance (cleaning time/cleaning interval/positive and negative cleaning direction/power-on cleaning can be set by yourself).
3. Remote control, touch dual control power to start, adjust the wind power.
4. The remote control lock screen locks the wind speed and parameter settings, and the workshop ion fan achieves standardization of static elimination.
5. With fan abnormal alarm, high-pressure abnormal alarm and ion balance threshold exceeding alarm function, the wind machine self-checking protection stops working.
6. Lora and Zigbee can be interchanged and networked to achieve network monitoring functions (local address, gateway address, and communication channel can all be set by themselves).
7. Digital display of ion balance.
8. The screen contrast is adjustable.
9. You can choose to increase the infrared sensor function according to your needs.
10. Fast static elimination speed, low balance voltage and high safety performance.
11. Energy saving and environmental protection, low power consumption.
